Asphalt Control Systems, Inc.

ASPHALT PLANT EQUIPMENT

HOT MIX SILOS

• SILO BODY:
  The silo body diameter is to be 10'-12' diameter and is to be fabricated from 1/4"-5/16" carbon steel plate, which are to be 100% welded. The side walls extend down to enclose the cone and are bolted or welded to the support frame. The walls are further supported for rigidity and roundness with 3" channels. The silo body may be provided with or without insulation.

• SILO CONE:
  The cone is fabricated from 3/8" thick abrasion resistant material with a slope o 60 degrees and an outlet of 24"-30" diameter. The cone is 100% welded to the silo body and further strengthened by 1/2" thick gussets. The cone may be provided with or without oil heating/insulation. Includes dual clam gates, fabricated from 3/8" abrasion resistant material, independently driven by two 5" diameter air cylinders.

	DRUM MIX PLANTS 80 - 600 TPH
	BAGHOUSES TO 80,000 CFM
	AGGREGATE COLD FEED BINS
	HOT MIX SILOS
	HOT MIX DRAG ELEVATORS
	HOT MIX BUCKET ELEVATORS
	CONTROL HOUSES

211 E. Denham Street ~ Livingston, Texas 77351
Tel:(936) 327-2558 ~ Fax: (936) 327-2700